End of financial year is upon us, get yourself a work belt or upgrade your office with a desk mat and claim it back on tax! FREE shipping in Australia when spending over $200

The "Lights out" belt
The "Lights out" belt
The "Lights out" belt
The "Lights out" belt
The "Lights out" belt
The "Lights out" belt
The "Lights out" belt
The "Lights out" belt
The "Lights out" belt

The "Lights out" belt

Regular price
Sale price
Unit price
Tax included. Shipping calculated at checkout.

They stole his car. They killed his dog.

Inspired by the film series "John Wick", the all black 'Lights out' belt is one for those who dont mind getting a little dark.

As Henry Ford once famously said "You can have any colour as long as it's black".

The belt features a black PVD coating over solid brass buckle and some thick black vegetable tanned full-grain bridle leather (Thomas Ware and Sons tannery Bristol UK) in 38mm width, handmade in Sydney Australia.

PVD which stands for "Physical Vapor Deposition" is a highly accurate plating process carried out in high vacuum environments at high temperatures. It produces really durable finish to prevent scratching.

Typically, black hardware that is found in the marketplace is not PVD, and is generally considered a black spray paint causing it to chip and scratch off quickly. PVD plating is the process used to plate high end watches for a durable finish.

Please note that the chicago screws are not PVD and is more susceptible to scratching and chipping than the buckle. Over time and with consistent contact you may see the nickel plated base layer under the screws - of course they will not be seen while wearing the belt***

**Due to multiple options of colours and sizes, belts are a made to order item. Please allow 7 days for your belt to be made to your requirements and please double check your size before ordering using the size guide**


  • 4.5-5mm thick veg tanned bridle leather 
  • 38mm wide 
  • PVD black over Solid brass buckle 
  • Black over Solid Brass Chicago screws
  • Oval holes that won’t stretch out
  • Rounded edges (for comfort) that are hand burnished 


CM indicated is to the centre hole of 7 holes. Holes are 2.5cm apart (1 inch), that gives you 3 inches to go up or down before you run out of holes.

 *if buying as a gift and an old belt is unavailable, belt sizes are true to pants size NOT ACTUAL INCHES (pants inches are not the same as true inches), if they're a 32" waisted pant , select a 32" belt.

Unfortunately as belts are made to order we cannot exchange for incorrect sizing*

If you belt size isn't shown, please reach out to us at hello@anvilhide.com for a custom order.

Please use the size guide by clicking here! 

Customer Reviews

No reviews yet Write a review